actuator

Articles tagged actuator in octomy

  • Water cooled servo
    17 March 2016

    I came over this really innovative solution to a common problem in robotics, namely the lack of power. The hopelessly American solution as employed by robotics…

  • Big push for the generator project.
    15 May 2015

    I decided to make a push for the GX25 generator project. First I removed the clutch from the GX25. I will be crafting some kind of frame for the generator…

  • Simple IK
    17 December 2014

    I came over this link while looking for a simple IK to drive a simple 3DOF robot arm I am making for work. There is also this youtube video . I have…

  • ODE instead of IKFast
    09 August 2013

    After working with IKFast for a while, I realized that the OpenRAVE + IKFast combo is overkill for my purpose, and It might not do what I need/want. I wrote my…

  • Anatomy of a robot limb
    03 August 2013

    For simplicity I have decided to keep all 6 limbs of Devol identical. Each limb will be interchangeable with any other. This I hope will make building and…

  • I decided to test electromechanical actuators first.
    06 June 2011

    In a previous set of posts I researched alternative ways to move the legs of my robot. Today I decided that I would try to make one prototype leg using…

  • Hydraulic actuators
    31 May 2011

    This is a continuation of my previous posts about actuators. What about hydraulics? Hydraulics and pneumatics have a lot in common, but instead of using gas to…

  • Pneumatic actuators
    30 May 2011

    This is a continuation of my previous post about actuators. Pneumatic actuators have the following benefits over electromechanical actuators: They can be made…

  • Electromagnetic actuators
    30 May 2011

    This is a continuation of my previous posts about actuators. Electromechanical actuators are often very simple to work with. You connect them to a controller…

  • What is a good actuator for my robot?
    30 May 2011

    Deciding which kind of actuator to use has bothered me for quite some time now. I would like to use this post to create a summary of what options are out there…