motor

Articles tagged motor in octomy

  • 4-Wheeled rig build
    18 October 2016

    I currently have 3 "rigs" I want to integrate OctoMY™ with. The hexy hexapod robot from arcbotics has been featured a few times before on this blog, but the…

  • Water cooled servo
    17 March 2016

    I came over this really innovative solution to a common problem in robotics, namely the lack of power. The hopelessly American solution as employed by robotics…

  • Finding the right brush-less Direct Current (BLDC) motor to use as generator
    24 May 2015

    Since I got my Honda GX25 motor, the task of finding the right generator to make the most efficient and compact generator for the batteries in the robot has…

  • Big push for the generator project.
    15 May 2015

    I decided to make a push for the GX25 generator project. First I removed the clutch from the GX25. I will be crafting some kind of frame for the generator…

  • EMCO F1P Step motor specs
    05 April 2015

    After my last post I have learned a lot about step motors. I have also manged to figure out the specs of the step motors found in the EMCO F1P, and as always…

  • Anatomy of a step motor
    02 April 2015

    I decided in the beginning of 2015 to stop spending time on my EMCO F1P CNC machines instead of the main goal of the project. Ironically that made me spend…

  • Honda GX25 Update
    23 July 2013

    The Honda GX25 that I un-boxed for quite some time ago has been started and runs great. I have since moved and it is in storage. The plan is to find a suitable…

  • Honda GX25 Unboxing
    02 August 2012

    The original box it came in was surprisingly light and small. The engine itself weighed just over 3 kilograms on my scale. The engine was fitted with the inner…