hardware

Articles tagged hardware in octomy

  • Body material and structure
    22 July 2014

    I have been bending my brains on the matter of how to build the robot body. There are so many options for materials, structures and methods each with their own…

  • Generator update
    07 July 2014

    I have been stuck with progress for some time on the generator. It turns out alternators are hard to come by for free/cheaps. While i continue to look for…

  • EMCO M1 update
    09 May 2014

    I now have no less than 3(!!) EMCO controllers in my workshop. And most importantly, I have all 3 axes working in my original F1P! After determining that my…

  • First impressions EMCO
    20 March 2014

    Just a quick note on the EMCO CNC machine. It looks kind of cheap the first time one lays ones eyes on it, but after tinkering with it for only a short period…

  • EMCO in the workshop
    18 March 2014

    Just a quick update. I FINALLY got my EMCO CNC machine into the workshop. I have already started the work on cleaning it up and troubleshooting it. And here…

  • CNC Update
    23 July 2013

    The EMCO F1 CNC machine that I received for some time ago has not yet been put to good use. I have moved lately, and thus I needed a place for this 200kg beast…

  • Power and electronics schematic
    01 June 2012

    I made a first sketch for the power and electronics diagram for DEVOL. DEVOL power and electronics schematic In essence the robot will rely on a 12V lead…