emco
Articles tagged emco in octomy
-
How are lubricants classified & graded?
12 July 2015After reading the manual of the emco F1P CNC Mill and learning that it recommends 4 different lubricants for different parts of the machine I have attained a…
-
EMCO F1P Step motor specs
05 April 2015After my last post I have learned a lot about step motors. I have also manged to figure out the specs of the step motors found in the EMCO F1P, and as always…
-
Anatomy of a step motor
02 April 2015I decided in the beginning of 2015 to stop spending time on my EMCO F1P CNC machines instead of the main goal of the project. Ironically that made me spend…
-
Reading Emcotronic M1 roms
20 August 2014I have successfully read the roms from the M1 mainboard using the TOP853 rom programmer. The process was surprisingly smooth. I was prepared for all sorts of…
-
TOP853 rom writer under Ubuntu
20 August 2014The TOP853 rom programmer arrived a few days ago and I just had the chance to check it out. Since I run Ubuntu as my primary desktop OS, I thought it would be…
-
Emcotronic M1 EPROM + Static RAM + CPU
03 August 2014Small update on the EMCO. After posting a few inquisitions on practicalmachinist.com and cnczone.com (major cnc related forums), without a single response at…
-
EMCO M1 update
09 May 2014I now have no less than 3(!!) EMCO controllers in my workshop. And most importantly, I have all 3 axes working in my original F1P! After determining that my…
-
First impressions EMCO
20 March 2014Just a quick note on the EMCO CNC machine. It looks kind of cheap the first time one lays ones eyes on it, but after tinkering with it for only a short period…
-
EMCO in the workshop
18 March 2014Just a quick update. I FINALLY got my EMCO CNC machine into the workshop. I have already started the work on cleaning it up and troubleshooting it. And here…